or more below the armpits without topping out. The padded part of the shoulder straps should end at 2 in./5 cm. The harness straps should wrap fully around the shoulders with no gaps between the pack and back. There is a gap between the harness and back of the shoulder.Yoke to C7 vertebra distance is more than 2 in./5 cm.Load lifters are angled below/above 30-60 degrees.If the torso length is too long or short, the customer may need a different pack size, model or an adjustment. Locate the C7 vertebra – the large protruding bone at the base of the neck. Locate the harness yoke – this is where the harness straps come together near the base of the user’s neck. If the torso length on the pack is adjusted correctly, the load lifters will sit between a 30 to 60-degree angle and align naturally with the shoulder straps. Tightening the load lifters will pull the pack close to the body and help stabilize the load. Tighten the shoulder harness straps by pulling them down and back. If the hipbelt is too large and “tops out” or does not offer the preferred amount of coverage, the customer may need a different pack size, model or adjustment (Fit-On-The-Fly hipbelt imaged). of webbing between the buckle and the hipbelt when tightened. The padding of the hipbelt should wrap around the hips with approximately 1-3 in./2.5-6 cm.
The hipbelt padding should sit halfway above/below the hipbone.īuckle and tighten the hipbelt evenly using Osprey’s cross-body ErgoPull. Put the pack on and make sure the hipbelt is centered and rests over the hipbone. SIZING / FITĬompletely loosen the pack’s hipbelt, harness and load-lifter straps. + The Custom Fit-on-the-Fly Hipbelt integrates the LightWire frame into the adjustment system-creating a better distribution of weight and, in turn, a better carry. + Crossbody ErgoPull hipbelt pulls weight into lumbar when hipbelt is tightened. + Incremental length and angle adjustments allow for a fine-tuned fit + Extendable Custom Fit-on-the-Fly Hipbelt offers a precise fit for varying waist sizes. + Spacer mesh fabric provides a soft and comfortable contact surface.
+ Custom Fit-on-the-Fly Shoulder Straps allow for a precise shoulder wrap and fit. + Custom Fit-on-the-Fly Shoulder Straps included + Easily adjustable harness system for various torso lengths + Mesh-covered foam lumbar for supportive, lightweight and comfortable contact surfaces. + Injection-molded, die-cut foam AirScape framesheet maintains comfortable back contact with ventilated airflow channels and maximum stability for carrying heavy loads. + 3.5 LightWire peripheral frame effectively transfers load to hipbelt. WOMEN’S SPECS XS/S M/L Cubic Inches 3173 3356 Liters 52 55 Pounds 4.77 4.82 Kilograms 2.17 2.19 Inches 29 h x 15 w x 10 d 31 h x 15 w x 10 d Centimeters 73 h x 38 w x 25 d 78 h x 38 w x 25 d SPECS XS/S M/L Cubic Inches 3783 3967 Liters 62 65 Pounds 4.85 4.89 Kilograms 2.2 2.22 Inches 30 h x 16 w x 11 d 31.5 h x 16 w x 11 d Centimeters 75 h x 40 w x 28 d 80 h x 40 w x 28 d SPECS S/M L/XL Cubic Inches 3356 3539 Liters 55 58 Pounds 4.83 4.87 Kilograms 2.19 2.21 Inches 31 h x 15 w x 10 d 33 h x 15 w x 10 d Centimeters 78 h x 38 w x 25 d 83 h x 38 w x 25 d
0 kommentar(er)
